1. Navigate to the Search Configuration tile on your dashboard and open the EDS API tile
2. Provide the server address, username, password, and profile associated with your organization’s EDS API profile

In the Display Settings tab, you can control how you want your search results to be displayed.

Display Sorting Options
When this box is checked, the 'sort by' option in the EDS List View will be visible.

Hide Authors in EDS List View and Bento 
When this box is checked, Authors will not be visible in the search results.

Hide Source in EDS List View and Bento
When this box is checked, Sources will not be visible in the search results.

Hide Subjects in EDS List View
When this box is checked, Subjects will not be visible in the search results.

Display Abstract in EDS List View and Bento
When this box is checked, Abstract will be visible in the search results.

Hide FullText in EDS Details Page
When checked, FullText will not be shown on the EDS details page.

Sorting options look like this:

EDS API Blocks 

The EDS API Blocks section is where administrators can configure Stacks to display the following content blocks on the left-hand side of an EDS record detail view:

• Related Information Block
• Related Items Block
• Custom Block

For detailed information on the EDS API Blocks see Related Insets.

Configure Authentication Type for EDS API for Open Athens Users:

1. Navigate to the 'Search Configuration' tile on your dashboard and open the 'EDS API' tile
2. Select the 'Authentication' tab
3. Enter Auth type=Shib
4. Click 'Save Configuration'

Restrict Content to authenticated users
You can enable this option to prevent unauthenticated users from viewing detailed information of search results.

1. Navigate to the EDS API tile (Dashboard > Search Configuration > EDS API) 
2. Select the 'Authentication' tab
3. Check the Restrict Content Box
   
   
    
4. In the Query Content Providers section, Enter an EDS Query to provide a list of content providers; or
5. In the Add a Content Provider section, Enter a content provider such as PubMed
6. In the list that appears, add a check to each content provider you wish to restrict content for
   
   
    
7. Click the SAVE button.

Limiters are designed to allow administrators to limit results to records based. These limiters are located in an expandable tab within the EDS search which users can use to override default limiters. 

From the Limiters tab you can select the appropriate limiters for your search results.

An expandable tab within EDS Search results contain checkboxes allowing users to override the default expander(s) set in the EDS Profile configured for the site. Select the appropriate expanders for your search results

Social Sharing icons allow users to share content through several different methods by clicking on the corresponding icon. Starting in Stacks build 262, the Social Sharing options have been moved to the Site Configuration tile. 

1. Navigate to the Site Configuration Tile (Dashboard > System Configuration > Site Configuration).
2. Click on the Social Sharing tab.
3. To enable the Social Share icon for EDS Searches add check for each service you would like to enable; or
4. remove the checkmark to disable the icon on EDS Searches.
   
   
    
5. Click the SAVE CONFIGURATION button.

Stacks allows you to feature designated search result types as featured tabs when users choose EDS API search from the drop-down menu.

1. Navigate to the Search Configuration tile and open the EDS API tile
2. Click the Featured Tabs tab

3.  Set up your featured tabs by choosing a facet filter type, and performing a query.
4. Click 'Query Facet Filters' to expand the accordion
5. Enter a common search term used in your organization
   1. Example 1 A Pharmaceutical company might choose 'Content Provider' and use the query "Diabetes"
   2. Example 2 A Public Library might choose 'Source Type' and use the query "plumbing"

6. Click 'Query EDS for Facet Filters'
7. You will then see a list of source types to choose from
8.  Select the facets to include in the featured tabs you want
9. Enter a title

10. Click 'Create Featured Tab'
11. You can create up to three featured tabs to add to EDS API Search Results
12. Choose the tabs you want by selecting your created tabs from the drop-down lists
13. If this option is left as "none" no tab will display
14. Continue selecting up to three featured tabs

14. Your featured tabs will look like this:

15. Click SAVE CONFIGURATION

The EDS Exact Match Placard is a publication title search. When a user performs a search with the EDS API search, and if a single publication is a match for the query, the publication's details will be displayed in its own placard at the top of the left-hand column beside the search results. If more than one publication is an exact match, no publication will be featured. Exact Match Publication can be enabled or disabled through the EDS API configuration.

The Exact Match Placard, if enabled, can also be added as a Bento box to the Bento search area.

1. Navigate to the Search Configuration tile on your dashboard and open the EDS API tile
2. Select the 'Placards' tab
3. Configure Placards, which include settings related to both Research Starters and Exact Match Publication.
4. Select 'Enable Exact Match Publication'
5. Click 'Save Configuration'

Exact Match Placards look like this if the user were to search EDS API for the search term "Consumer Reports"

Research Starters provide quick summaries of the most popular topics in EBSCO Discovery Service (EDS). Research Starters can be enabled from the Search Configuration tile on the Dashboard and will be included in your EDS API search results (when available). If a Research Starter is available, it will always appear as the first search result in the list of search results.

The following image illustrates a research starter in the Discovery API search:

Enable Research Starters

In order for Research Starters to be enabled, your EDS API search credentials must be properly configured. Refer to the EDS API section to learn about the necessary configuration.

1. Navigate to your dashboard and click on the  'Search Configuration', tile

2. Open the 'EDS API' tile

3. Click on the 'Placards' tab

3. Make sure that the 'Enable Research Starters' box is checked

4. Click 'SAVE CONFIGURATION'

Add a Research Starter to a Bento Box

Prior to adding a Research Starter to a Bento Box, EDS API search must be configured, and Research Starters must be enabled.

1. Navigate to the search results Landing Page that you would like to add a Research Starter.

2. Click the 'Customize this page' button found at the bottom of the page.

Click the '+' button in the top right corner of the panel you'd like to add the Research Starter.

Click 'Bento Search' in the left-hand menu.

Click 'Add a Bento Box'

Click on the 'Select a Bento Box' dropdown menu to expand it

Select 'Research Starters' under EDS Search

Provide a title for the Bento Box

Click 'FINISH'

The EDS Autocomplete feature gives search suggestions. It looks like this:

1. To Configure EDS Autocomplete, navigate to your dashboard and open the 'Search Configuration' tile
2. Open the 'EDS API' tile
3. Choose the 'Placards' tab
4. Select the EDS Autocomplete option
5. Click 'Save Configuration'

A Custom Filters dropdown list will appear below the main search bar containing the custom filters inputted below if the user has selected the EDS API search format. To enable this feature:

1. Navigate to the Search Configuration tile and open the EDS API tile
2. Toggle the checkbox associated with "Show custom filters drop-down"
3. Click SAVE CONFIGURATION

In the custom filter fields

1. Add a label for your filter
2. add one or more parameters to this filter

3. Click Add another filter to add more custom filter options
4. Click SAVE CONFIGURATION

How to Create Your Filters:

1. To look up Locations codes or other parameters specific to your library, conduct a search in Stacks

2. Apply the facet filter desired (such as location) and copy the URL after the last & symbol: 

   https://public.stacksdiscovery.com/eds?query=apple&catalog=eds&ff[]=SourceType:eBooks

3. Paste the copied URL after the last & symbol in the 'filter field'

   • Filter Results by Author Field (e.g., searchfield=AU)
   • Filter by a Location (e.g., cl[0]=L01222917:y)

4. Include multiple parameters by using & (ampersand) as your separator:

   • Filter Results by Author Field and a location (e.g., searchfield=AU&cl[0]=L01222917:y)
   • Filter by two locations (e.g., cl[0]=L01222917:y&cl[1]=L01222918:y)

Here are some examples to get you started:

Search Types:

Author
searchfield=AU

Keyword
searchfield=KE

Title
searchfield=TI

Subject
searchfield=SU

Subject Phrase
searchfield=DE

Journal Name
searchfield=JN

ISBN
searchfield=IB

ISSN
searchfield=IS

Source Types: 

Academic Journals
ff[]=SourceType:Academic%20Journals

Audio
ff[]=SourceType:Audio

Biographies
ff[]=SourceType:Biographies

Books
ff[]=SourceType:Books

Conference Material
ff[]=SourceType:Conference%20Materials

Dissertations
ff[]=SourceType:Dissertations

Electronic Resources 
ff[]=SourceType:Electronic%20Resources

Magazines
ff[]=SourceType:Magazines

Maps
ff[]=SourceType:Maps

Music Scores
ff[]=SourceType:Music%20Scores

News
ff[]=SourceType:News

Non-print Resources
ff[]=SourceType:Non-Print%20Resources

Primary Source Documents
ff[]=SourceType:Primary%20Source%20Documents

Reports
ff[]=SourceType:Reports

Reviews
ff[]=SourceType:Reviews

Videos
ff[]=SourceType:Videos

eBooks
ff[]=SourceType:eBooks

Language

English
ff[]=Language:english

German
ff[]=Language:german

Chinese
ff[]=Language:chinese

etc……

Content Provider

Sample Content Provider
ff[]=ContentProvider:Knovel 

V 3.0.0